DBCI Commercial Roll-Up Doors

Roll-Up Overview | DBCI | U.S. Door

Steelbuilding.com does not provide installation services for our products. Steelbuilding.com has no way to judge whether a customer has the skill or experience to safely install an overhead door, so we recommend using a professional installer.

• General Description
  Series 2000/2250 is designed for frequent usage requirements; light duty applications for frequent usage include warehouse, freight terminal and industrial warehouse. Series 2000/2250 utilizes 12" drums. Limited maximum size of 12' x 18'.
• Curtain
  26-gauge, Grade E hard steel, deep ribbed corrugation, 20 standard colors, siliconized polyester paint over primer coat, wash coat over primer interior side, 25-year film integrity warranty, up to 25-year guarantee against chalking and fading, improved flexible wear strips.
• Bottom Bar
  6063-T6 alumninum extrusion, 2" x 1-1/2" galvanized angles, bulb astrigal, stainless steel nuts and bolts.
• Axle/Torque Tube
  1-5/16" O.D. steel axle 14-gauge, oil tempered torsion springs, 16-gauge 12" galvanized drums, steel ball bearings staked in drums, full top sheet 26-gauge galvanized.
• Guides (Illustration - PDF 432 Kb )
  14-gauge galvanized steel guides, polyetheylene wear strip, bolt-on head stop. 15/8" deep engagement, pre-punched for lock and attachment screws.
• Hardware
  13-gauge saddle clamps, 10-gauge slide locks (2 per door), 16-gauge step plate (2 per door), 1/4" steel angle T-bracket.
• Options
  Insulation Series 2250, chain hoist 4:1 reduction, vision panels (17" x 5"), top draft stop, hood, steel mounting plates, electric operator.
• Documents
  Installation Instructions (PDF - 751 Kb)
  Information Sheet (PDF - 149 Kb)
  Supplemental Information Sheet (PDF - 140 Kb)

• General Description
  Series 2500/2750 is designed for frequent usage requirements; light duty applications for frequent usage include warehouse, freight terminal and industrial warehouse. Series 2500/2750 utilizes 12" drums. Limited maximum size of 18' x 18'.
• Curtain
  26-gauge, Grade E hard steel, deep ribbed corrugation, 20 standard colors, siliconized polyester paint over primer coat, wash coat over primer interior side, 25-year film integrity warranty, up to 25-year guarantee against chalking and fading, flexible wear strips.
• Bottom Bar
  6063-T6 alumninum extrusion, 2" x 1-1/2" galvanized angles, bulb astrigal, stainless steel nuts and bolts.
• Axle/Torque Tube
  1-5/16" O.D. steel axle 14-gauge, oil tempered torsion springs, 16-gauge 12" galvanized drums, steel ball bearings staked in drums, full top sheet 26-gauge galvanized.
• Guides (Illustration - PDF 432 Kb )
  12-gauge galvanized steel guides, polyetheylene wear strip, bolt-on head stop. 221/32 " deep engagement, pre-punched for lock and attachment screws.
• Hardware
  13-gauge saddle clamps, 10-gauge slide locks (2 per door), 16-gauge step plate (2 per door), 1/4" steel angle T-bracket.
• Options
  Insulation Series 2750, chain hoist 4:1 reduction, vision panels (17" x 5"), top draft stop, hood, steel mounting plates, electric operator.
• Documents
  Installation Instructions (PDF - 751 Kb)
  Information Sheet (PDF - 149 Kb)
  Supplemental Information Sheet (PDF - 268 Kb)

• General Description
  Series 5000 is designed to meet stringent building codes in Coastal Regions and Florida and includes deep engagement guides and windlocks for stronger/better performances. The Series 5000 utilizes 12" drums. Limited maximum size of 16' x 20'.
• MPH Certification
  10' wide = +36 PSF/ -45 PSF
  11' wide = +35 PSF/ -43 PSF
  12' wide = +34 PSF/ -42 PSF
  13' wide = +33 PSF/ -40 PSF
  14' wide = +32 PSF/ -39 PSF
  15' wide = +31 PSF/ -38 PSF
  16' wide = +30 PSF/ -36 PSF
• Curtain
  26-gauge galvanized, Grade E hard steel, deep ribbed corrugation, 20 standard colors, siliconized polyester paint over primer coat, wash coat over primer interior side, 25-year film integrity warranty, up to 25-year guarantee against chalking and fading, improved flexible wear strips.
• Bottom Bar
  6063-T6 alumninum extrusion, 2" x 11/2" galvanized angles, bulb astrigal (durometer 75), stainless steel nuts and bolts.
• Axle/Torque Tube
  1-5/16" O.D. steel axle 14-gauge (11-gauge on doors 13'6" and larger), oil tempered torsion springs, 16-gauge 12" galvanized drums, shielded steel ball bearings staked in drums, full top sheet 26-gauge galvanized.
• Guides
  12-gauge galvanized steel guides with 12-gauge windlock bar spot welded to guide, polyetheylene wear strip, bolt-on head stop 1/4" plate steel, 3 " deep engagement, pre-punched for lock and attachment screws.
• Hardware
  13-gauge saddle clamps, 10-gauge slide locks (2 per door), 16-gauge step plate (2 per door), 1/4" steel angle T-bracket.
• Options
  Chain hoist 4:1 reduction, chain hoist 8:1 reduction, vision panels (17" x 5"), top draft stop, hood top header seal, steel mounting plates, electric operator.
• Documents
  Installation Instructions (PDF - 3.48 Mb)
  Information Sheet (PDF - 140 Kb)
  Supplemental Information Sheet (PDF - 1.14 Mb)

• General Description
  Series 650/651 is the premium door for easy operation and maintenance and features shielded steel radial bearings on both support brackets. The DBCI tension bracket allows you to easily, quickly, and safely adjust tension on your door. With unlimited tensioning positions, the 650/651 door can be adjusted to the right amount of tension, avoiding costly service calls.
• Curtain
  26-gauge, Grade E hard steel, 5/8" deep ribbed corrugation, 20 standard colors, siliconized polyester paint over primer coat, wash coat over primer interior side, 25-year film integrity warranty, up to 25-year guarantee against chalking and fading, stainless steel latch.
• Bottom Bar
  6063-T6 alumninum extrusion, 2" x 1-1/2" galvanized angles, blade astrical.
• Axle Assembly
  1-5/16" O.D. steel axle 14-gauge, oil tempered torsion springs, 18-gauge 9.5" drums, fully accessible springs for inspection.
• Guides (Illustration - HTML )
  18-gauge galvanized steel guides, pre-punched holes, polyetheylene guide strips, slotted head stop.
• Hardware
  12-gauge door stops with slotted mounting holes, 14-gauge galvanized steel handles, 12-gauge coined tension bracket, 12-gauge bearing bracket left side.
• Options
  Insulation Series 651, bulb weatherstrip, top and side draft stop, standard easy-to-use tension bracket.
• Documents
  Installation Instructions (PDF - 557 Kb)
  Supplemental Information Sheet (PDF - 173 Kb)