Steel buildings / metal buildings, steel garage doors from SteelBuilding.com  
Home | Get A Quote | Contact Us  
Buying from Us
Quality |Value |Quote Checklist
Project Planning
Overall |Do's and Don'ts |
Delivery
Framing
Overview |Features
Specifications |Frame Types
Roof Pitch |Roof Extensions
Panels & Trim
Specifications |Panel Profiles
Panel Options |Liner Panels
Base Conditions |Trim & Gutter
Accessories
Insulation |Fiberglass
Reflective Foil |Walk Doors
Windows |Ventilation
STEELBUILDING.COM is your first and only online supplier of pre-engineered steel buildings Photo of Man in Hard Hat Holding Blueprints

Steel Building Panel Specifications



General specifications for Steel Buildings
  • All panels fabricated from first-run top-grade steel
  • All 26-gauge material is .0185 mil, 80,000 PSI
  • All 29-gauge material is .0157 mil, 80,000 PSI
  • Bare panels coated with Bare GALVALUME®
  • Colored panels consist of GALVALUME®-coated substrate that is prepped, and coated with silicon-polyester paint before fabrication
  • Bare GALVALUME® panels covered by 20-yearwarranty
  • Colored panels covered by 25-year limitedpaint warranty--Crimson Red warranty for 5 years
Wall panels for Commercial, Agricultural or Industrial   Steel Buildings
  • Standard gauge: 26
  • Standard paneling: colored PBR
  • Optional colored PBA architectural panel (cost add)
  • Optional Bare GALVALUME® PBR (cost deduct, special quote only)
  • Optional colored or Bare GALVALUME® PBU (special quote only)
  • Optional 70% PVDF paint (special quote only)
Steel Building Roof panels
  • Roof system meets Underwriter's Laboratories Class 90 wind uplift rating
  • Standard gauge: 26
  • Standard paneling: Bare GALVALUME® PBR
  • Optional colored PBR panels (cost add)
  • Optional 70% PVDF paint (special quote only)
  • Optional UltraDek standing seam (special quote only)
Soffit
  • Standard gauge: 26
  • Standard paneling: colored PBR
  • Optional Bare GALVALUME® PBR (cost deduct)
  • Optional 70% PVDF paint (special quote only)
Liner and Partition panels for Steel Buildings
  • Standard gauge: 29
  • Standard paneling: choice of colored PBR or PBU
  • Optional 26-gauge panels (special quote only)
Roof fasteners
  • The roofs of steel buildings are fully exposed to the elements, so special precautions must be taken to prevent rust. The most common cause of rust in metal roofs is the screw. Although the finish (Galvalume coating or paint) protects the exposed surface of the panels, the screws penetrate this painted surface and make direct metal-to-metal contact. If the screws do not seal properly or develop rust themselves, they will cause the panels to rust.

    STEELBUILDING.COM supplies only the highest-quality self-drilling screws for use with its roof panels. These deluxe fasteners have a zinc-aluminum alloy "Zac" head that cannot red rust. Its cupped design and SPDM sealing washer also protect the connection from moisture. Consequently, STEELBUILDING.COM offers a lifetime red-rust warranty on all roof fasteners.

This 40x50x16 has Light Stone walls, Desert Sand 3:12 pitch roof, Light Stone corner trim and jamb flashing, and Desert Sand trim
This 40x50x16 has Light Stone walls, Desert Sand 3:12 pitch roof, Light Stone corner trim and jamb flashing, and Desert Sand trim.

This 40x60x10 has Hawaiian Blue PBR walls, a Bare GALVALUME® PBR roof with 3:12 pitch, and Polar White trim (no jamb flashing)
This 40x60x10 has Hawaiian Blue PBR walls, a Bare GALVALUME® PBR roof with 3:12 pitch, and Polar White trim (no jamb flashing).


This 30x50x14 features PBA walls in Desert Sand with Fern Green trim and PBR roof in 3:12 pitch
This 30x50x14 features PBA walls in Desert Sand with Fern Green trim and PBR roof in 3:12 pitch.

Standard fastener and ZAC lifetime fastener


Contact Us: STEELBUILDING.COM, Inc.
2612 Gribble | North Little Rock, AR 72114 | 800.945.6572 | info@steelbuildling.com

Powered by NCI Technology Solutions
© 2000-2016 All Rights Reserved
Terms of Use | Privacy Policy